Nissan Juke Service and Repair Manual : Removal and installation
Exhaust system
Periodic maintenance
EXHAUST SYSTEM Inspection Check exhaust pipes, muffler and mounting for improper attachment, leaks, cracks, damage or deterioration. • If anything is found, repair or replace damaged parts. ...Exploded View
1. Main muffler 2. Mounting rubber 3. Ring gasket 4. Center tube 5. Exhaust gas temperature sensor 2 6. Diesel particulate filter assembly 7. Gasket 8. Stud bolt 9. Diesel particulate ...Other materials:
Remote keyless entry receiver
Component Function Check
1.CHECK FUNCTION
1. Select “DOOR LOCK” of “BCM” using CONSULT-III.
2. Select “KEYLESS ” or “KEYLESS UNLOCK” in “DATA MONITOR” mode.
3. Check that the function operates normally according to the following
conditions.
It the inspection result normal?
YES >> Rem ...
Position switch
Removal and Installation
REMOVAL
1. Remove air cleaner case. (K9K) Refer to EM-280, "Removal and
Installation".
2. Remove battery. (MR16DDT) Refer to PG-124, "Removal and Installation".
3. Disconnect position switch connector.
4. Remove position switch from transaxle case. ...
Engine coolant temperature gauge
The gauge 1 indicates the engine coolant temperature.
The engine coolant temperature is within the normal range when the gauge is within
the zone 2 shown in the illustration.
The engine coolant temperature varies with the outside air temperature and driving
conditions.
CAUTION
If the gauge i ...