Periodic maintenance

EXHAUST SYSTEM Inspection Check exhaust pipes, muffler, and mounting for improper attachment, leakage, cracks, damage or deterioration. • If anything is found, repair or replace damaged parts. ...

Exploded View

1. Mounting rubber 2. Main muffler 3. Seal bearing 4. Spring 5. Mounting rubber 6. Seal bearing 7. Exhaust front tube 8. Heated oxygen sensor 2 9. Sub muffler 10. Gasket : Always rep ...

Other materials:

P0171 fuel injection system function
DTC Logic DTC DETECTION LOGIC With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the A/F sensors 1. The ECM calculates the necessary compensation to correct th ...

Heated seat switch
Exploded View 1. Heated seat swich 2. Switch bracket 3. Console switch finisher Removal and Installation REMOVAL CAUTION: When removing and installing, use shop cloths to protect from damage. 1. Remove the console switch finisher. Refer to IP-23, "Removal and Installation". ...

Power supply and ground circuit
Diagnosis Procedure 1.CHECK FUSES AND FUSIBLE LINK Check that the following IPDM E/R fuses or fusible links are not blown. Is the fuse fusing? YES >> Replace the blown fuse or fusible link after repairing the affected circuit if a fuse or fusible link is blown. NO >> GO TO 2. ...