Quick Connector

CAUTION: • After connecting fuel tube quick connectors, check quick connectors are secure. • Ensure that connector and resin tube never contact any adjacent parts. ...

Fuel level sensor unit, fuel filter and fuel pump assembly

2WD : Exploded View 1. Fuel tank 2. Lock ring 3. Fuel level sensor unit, fuel filter and fuel pump assembly 4. Rock ring Vehicle front : N?·m (kg-m, ft-lb) : Always replace after every ...

Other materials:

Door does not lock/unlock with door lock and unlock switch
All door ALL DOOR : Description All doors do not lock/unlock using door lock and unlock switch. ALL DOOR : Diagnosis Procedure 1.CHECK DOOR LOCK AND UNLOCK SWITCH Check door lock and unlock switch. Refer to the following. • Driver side: Refer to DLK-391, "DRIVER SIDE : Component Functio ...

Front suspension assembly
Inspection COMPONENT PART Check the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal. BALL JOINT AXIAL END PLAY 1. Set front wheels in a straight-ahead position. 2. Measure axial end play by prying it up/down with iron bar or eq ...

IGN off interlock door unlock function does not operate
Diagnosis Procedure 1.CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT” 1. Select “DOOR LOCK” of “BCM” using CONSULT-III. 2. Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode. 3. Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”. Refer to DLK-371, "DOOR LOCK ...