Nissan Juke Service and Repair Manual : Remote keyless entry system
Remote keyless entry function
REMOTE KEYLESS ENTRY FUNCTION : System Diagram
REMOTE KEYLESS ENTRY FUNCTION : System Description
DOOR LOCK AND UNLOCK OPERATION
• When door lock and unlock button of keyfob is pressed, door lock and unlock signal transmits from keyfob to BCM via remote keyless entry receiver.
• When BCM receives the door lock and unlock signal, it operates door lock actuator, blinks the hazard lamp at the same time as a reminder.
OPERATION CONDITION
If the following conditions are satisfied, door lock/unlock operation is performed if the keyfob is operated.
OPERATION AREA
To ensure that the keyfob works effectively, use within 100 cm (3 ft) range of each door, however the operable range may differ according to surroundings.
ANTI-HIJACK FUNCTION
Information of super lock function with anti-hijack function.
Refer to DLK-367, "SUPER LOCK FUNCTION : System Description".
HAZARD REMINDER OPERATION
When door is locked or unlocked by keyfob, then BCM blinks hazard warning lamp as a reminder.
NOTE
:
Hazard reminder mode can be changed with CONSULT-III. Refer to DLK-372, "MULTI
REMOTE ENT : CONSULT-
III Function (BCM - MULTI REMOTE ENT) (With Super Lock)".
AUTO DOOR LOCK FUNCTION
After door is unlocked by keyfob button operation and if 30 seconds or more passes without performing the following operation, all doors are automatically locked. However, operation check function does not activate.
Auto door lock mode can be changed by the “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to DLK- 371, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)".
INTERIOR ROOM LAMP CONTROL FUNCTION
Interior room lamp is controlled according to door lock/unlock state, refer to INL-6, "INTERIOR ROOM LAMP CONTROL SYSTEM : System Description".
Super lock function
SUPER LOCK FUNCTION : System Diagram
SUPER LOCK FUNCTION : System Description
• Super lock provides a higher anti-theft performance than a conventional door lock function.
• BCM controls the super lock system.
• When all doors are closed super lock system can be set/release by keyfob.
• When super lock is set, inside handle of doors do not work.
SUPER LOCK SET OPERATION (LOCK OPERATION)
When Keyfob lock button is operated while all doors are in unlock state, super lock of all doors is set, and simultaneously, all doors are locked.
SUPER LOCK RELEASE OPERATION (UNLOCK OERATION) WITH ANTI-HIJACK MODE
When Keyfob unlock button is operated while super lock of all doors is set, super lock of all doors is released, and simultaneously, driver door are unlocked. When Keyfob unlock button is operated again, all doors are unlocked.
SUPER LOCK RELEASE OPERATION (UNLOCK OERATION) WITHOUT ANTI-HIJACK MODE
When keyfob unlock button is operated while super lock of all doors is set, super lock of all doors is released, and simultaneously, all doors are unlocked.
ANTI-HIJACK FUNCTION SETTING
With CONSULT-III
Refer to DLK-371, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)".
Without CONSULT-III
• ON/OFF can be switched when keyfob lock button and unlock button are pressed simultaneously for 4 seconds or more while steering lock is locked.
• When mode is switched, hazard warning lamp blinks.
OFF → ON : 1 blinks ON → OFF : 3 blink
Power door lock system
System Diagram System Description DOOR LOCK FUNCTION • The door lock and unlock switch (driver side) is build into power window main switch. • The door lock and unlock switch (passenger side) ...Back door opener system
System Diagram System Description BACK DOOR OPENER OPERATION When back door opener switch is pressed, BCM operates back door opener actuator. NOTE: Back door opener actuator is not for lock ...Other materials:
Seat belt buckle switch signal circuit (driver side)
Component Function Check
1.CHECK COMBINATION METER INPUT SIGNAL
Select the “Data Monitor” for the “METER/M&A” and check the “BUCKLE SW”
monitor value.
BUCKLE SW
When driver seat belt is fastened : Off
When driver seat belt is unfastened : On
>> INSPECTION END
Diagnosis Procedure
...
Door locks/unlocks precaution
• Do not push the door handle request switch with the Intelligent Key held in
your hand as illustrated. The close distance to the door handle will cause the Intelligent
Key system to have difficulty recognizing that the Intelligent Key is outside the
vehicle.
• After locking with the door h ...
Front wheel hub and K
Exploded View
1. Steering knuckle
2. Splash guard
3. Hub bolt
4. Wheel hub assembly (Bearing-integrated
type)
5. Disc rotor
6. Wheel hub lock nut
7. Adjusting cap
8. Cotter pin
A. Tightening must be done following the installation procedure. Refer to
FAX-68, "Removal and Insta ...