Nissan Juke Service and Repair Manual : Remote keyless entry receiver
Removal and Installation
REMOVAL
1. Remove the glove box assembly. Refer to IP-13, "Removal and Installation".
2. Remove the remote keyless entry receiver (1) mounting bolt (A), and then remove remote keyless entry receiver.
INSTALLATION
Install in the reverse order of removal.
Door switch
Exploded View 1. Door switch 2. TORX bolt Removal and Installation REMOVAL Remove the TORX bolt (A), and then remove door switch (1). INSTALLATION Install in the reverse order of removal. ...Keyfob battery
Exploded View 1. Upper case 2. Key 3. Switch cover 4. Switch rubber 5. Board surface 6. Battery 7. plate 8. Lower case 9. Screw Removal and Installation REMOVAL 1. Remove screw (9) ...Other materials:
P0380 glow rela
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P0380 is displayed with DTC P0560 or P0657, first perform trouble
diagnosis for DTC P0560 or P0657.
Refer to EC-963, "DTC Logic" (DTC P0560) or EC-976, "DTC Logic" (DTC P0657).
Diagnosis Procedure
1.CHECK GLOW RELAY POWER SUP ...
Coil spring
Exploded View
1. Upper rubber seat
2. Coil spring
3. Lower rubber seat
4. Rear suspension beam
Removal and Installation
REMOVAL
1. Remove tires. Refer to WT-7, "Removal and Installation".
2. Set jack under rear suspension beam.
CAUTION:
• Never damage the suspension beam wi ...
Vehicle Security System
The vehicle security system provides visual and audio alarm signals if someone
opens the doors, or lift gate when the system is armed. It is not, however, a motion
detection type system that activates when a vehicle is moved or when a vibration
occurs.
The system helps deter vehicle theft but ...