Nissan Juke Service and Repair Manual : Rear Suspension 4WD
- Precaution
- Symptom diagnosis
- Periodic maintenance
- Removal and installation
- Rear shock absorber
- Coil spring
- Suspension arm
- Lower link
- Upper link
- Rear stabilizer
- Rear suspension assembly
- Service data and specifications (SDS)
Wheelarch Height
Measure value under unladen* conditions. *: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions. ...Precaution
Precautions for Suspension • When installing rubber bushings, the final tightening must be carried out under unladen conditions with tires on ground. Spilled oil might shorten the life of rubber b ...Other materials:
Outside mirror
Exploded View
1. Door mirror cover
2. Actuator
3. Glass mirror
4. Door mirror corner cover
5. Door mirror assembly
: Clip
: Pawl
Door mirror assembly
DOOR MIRROR ASSEMBLY : Removal and Installation
CAUTION:
When removing, always use a remover tool that is made of plastic.
REMOVAL
1 ...
Injection tube and fuel injector
Exploded View
1. Spill hose
2. Injection tube
3. Fuel injector
4. Heat protection washer
5. Fuel injector bracket
6. Fuel injector bracket spacer
7. Fuel rail stud bolt
8. Fuel rail
9. High pressure protection cover (lower)
10. Injection tube
11. High pressure supply pump
12. H ...
Engine idle speed too high
Description
CHART 5: ENGINE IDLE SPEED TOO HIGH
Diagnosis Procedure
1.CHECK ECM POWER SUPPLY AND GROUND CIRCUIT
Check ECM power supply and ground circuit. Refer to EC-885, "Diagnosis
Procedure".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or repla ...