Nissan Juke Service and Repair Manual : Rear power window switch

Component Function Check

1. CHECK REAR POWER WINDOW SWITCH FUNCTION

Check rear power window motor operation with rear power window switch.

Is the inspection result normal? YES >> INSPECTION END

NO >> Refer to PWC-24, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK REAR POWER WINDOW SWITCH INPUT SIGNAL

1. Turn ignition switch OFF.

2. Disconnect rear power window switch connector.

3. Turn ignition switch ON.

4. Check voltage between rear power window switch harness connector and ground.

Is the inspection result normal?


Is the inspection result normal? YES >> GO TO 3.

NO >> GO TO 2.

2.CHECK REAR POWER WINDOW SWITCH CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect power window main switch connector.

3. Check continuity between rear power window switch harness connector and power window main switch harness connector.

(): RHD models


(): RHD models

4. Check continuity between rear power window switch harness connector and ground.

Is the inspection result normal?


Is the inspection result normal? YES >> Replace power window main switch.

NO >> Repair or replace harness.

3.CHECK REAR POWER WINDOW SWITCH

Check rear power window switch.

Refer to PWC-25, "Component Inspection".

Is the inspection result normal? YES >> GO TO 4.

NO >> Replace rear power window switch.

4.CHECK INTERMITTENT INCIDENT

Refer to GI-42, "Intermittent Incident".

>> INSPECTION END

Component Inspection

1.CHECK REAR POWER WINDOW SWITCH

1. Turn ignition switch OFF.

2. Disconnect rear power window switch connector.

3. Check rear power window switch terminals under the following conditions.

Is the inspection result normal?


Is the inspection result normal? YES >> INSPECTION END

NO >> Replace rear power window switch.

    Front power window switch (passenger side)
    Component Function Check 1. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) FUNCTION Check front power window motor (passenger side) operation with front power window switch (passenger side). ...

    Power window motor
    DRIVER SIDE DRIVER SIDE : Component Function Check 1. CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) OPERATION Check front power window motor (driver side) operation with power window main switch. ...

    Other materials:

    Push starting
    Do not attempt to start the engine by pushing. CAUTION • Continuously Variable Transmission (CVT) models cannot be pushstarted or tow-started. Attempting to do so may cause transmission damage. • Three-way catalyst equipped models should not be started by pushing since the three way catalyst ...

    Power window motor
    DRIVER SIDE DRIVER SIDE : Component Function Check 1. CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) OPERATION Check front power window motor (driver side) operation with power window main switch. Is the inspection result normal? YES >> INSPECTION END NO >> Refer to PWC-26, " ...

    Sensor rotor
    Front sensor rotor : Removal and Installation REMOVAL Replace wheel hub as an assembly when replacing because sensor rotor cannot be disassembled. Refer to FAX-43, "Removal and Installation". INSTALLATION Replace wheel hub as an assembly when replacing because sensor rotor cannot ...