Nissan Juke Service and Repair Manual : Rear fender cover
Exploded View
1. Rear fender cover 2. Rear fender
Removal and Installation
REMOVAL
Disengage rear fender cover fixing clips using remover tool (A), and then remove rear fender cover.
CAUTION:
Apply protective tape (B) to the body side to protect from damage
.
: Clip
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing rear fender cover, check that clips are securely fitted in body
panel holes, and then
press them it.
Door sash tape
Exploded View 1. Front door panel 2. Front door sash tape 3. Rear door sash tape 4. Rear door panel : Do not reuse Front door sash tape FRONT DOOR SASH TAPE : Removal and Installation REMO ...Back door finisher
Exploded View 1. Rear view camera 2. Back door opener request switch 3. Emblem 4. Back door finisher : Clip : Pawl : Do not reuse Removal and Installation REMOVAL 1. Remove back door tri ...Other materials:
Diagnosis Procedure
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative
terminal and wait at least 3
minutes. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
1.CHECK HARNESS CONNECTOR
Check the harness connector.
Is the inspection res ...
Component parts
Body control system
BODY CONTROL SYSTEM : Component Parts Location
RHD MODELS
1. BCM
A. Behind of glove box (Left side)
LHD MODELS
1. BCM
A. Behind of instrument lower panel LH
(Left side)
Power consumption control system
POWER CONSUMPTION CONTROL SYSTEM : Component Parts Location
1 ...
P2263 TC system
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1.CHECK VACUUM HOSES AND VACUUM GALLERY
1. Turn ignition switch OFF.
2. Check vacuum hoses and vacuum gallery for clogging, cracks
or improper connection. Refer to EC-825, "TURBOCHARGER
BOOST CONTROL : Vacuum Hose Drawing".
Is t ...