Work

• After removing and installing the opening/closing parts, be sure to carry out fitting adjustments to check their operational. • Check the lubrication level, damage, and wear of each part. If nec ...

System description

...

Other materials:

Trouble diagnosis - specification value
Description The specification (SP) value indicates the tolerance of the value that is displayed in “SPEC” of “DATA MONITOR” mode of CONSULT-III during normal operation of the Engine Control System. When the value in “SPEC” of “DATA MONITOR” mode is within the SP value, the Engine Control Sys ...

Periodic maintenance
IDLE SPEED Inspection 1.CHECK IDLE SPEED With CONSULT-III Check idle speed in “DATA MONITOR” mode with CONSULT-III. With GST Check idle speed with Service $01 of GST. Without CONSULT-III Check idle speed by installing the pulse type tachometer clamp on the loop wire or on suitable high ...

Wiper and washer system
Wiring Diagram - WIPER AND WASHER SYSTEM - For connector terminal arrangements, harness layouts, and alphabets in a (option abbreviation; if not described in wiring diagram), refer to GI-12, "Connector Information/Explanation of Option Abbreviation". ...