Precautions for Drive Shaft

• Observe the following precautions when disassembling and assembling drive shaft. - Never disassemble joint sub-assembly because it is non-overhaul parts. - Perform work in a location which is as ...

Special Service Tool

...

Other materials:

Cooling fan
Component Function Check 1.CHECK COOLING FAN FUNCTION With CONSULT-III 1. Turn ignition switch ON. 2. Perform “COOLING FAN” in “ACTIVE TEST” mode with CONSULT-III. 3. Touch “LOW” and “Hi” on the CONSULT-III screen. 4. Check that cooling fan operates at each speed. Without CONSULT-III 1. Pe ...

Power supply and ground circuit
A/C auto AMP. : Diagnosis Procedure 1.CHECK SYMPTOM Check symptom (A or B). Which symptom is detected? A >> GO TO 2. B >> GO TO 5. 2.CHECK FUSE 1. Turn ignition switch OFF. 2. Check 10A fuse (No. 3). NOTE: Refer to PG-23, "Fuse and Fusible Link Arrangement". ...

Front disc brake
Brake pad : Inspection and Adjustment INSPECTION Check brake pad wear thickness from an inspection hole on cylinder body. Check using a scale if necessary.Wear thickness : Refer to BR-137, "Front Disc Brake". ADJUSTMENT Burnish contact surfaces between disc rotor and brake pads ac ...