Service Notice or Precautions for Manual Transaxle

CAUTION: • Never reuse CSC (Concentric Slave Cylinder). Because CSC slides back to the original position every time when removing transaxle assembly. At this timing, dust on the sliding parts ma ...

Special Service Tools

...

Other materials:

EPS warning lamp
Component Function Check 1.CHECK THE ILLUMINATION OF THE EPS WARNING LAMP Check that the EPS warning lamp turns ON when ignition switch turns ON. Then, EPS warning lamp turns OFF after the engine is started. Is the inspection result normal? YES >> INSPECTION END NO >> Perform t ...

Parking brake switch signal circuit
Diagnosis Procedure 1.CHECK COMBINATION METER INPUT SIGNAL 1. Turn ignition switch ON. 2. Check the voltage between combination meter harness connector and ground. Is the inspection result normal? YES >> INSPECTION END NO >> GO TO 2. 2.CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT ...

Component parts
CVT control system : Component Parts Location 1. Multi display unit (MDU)* Refer to DMS-3, "Component Parts Location". 2. Combination meter 3. S mode indicator (On the combination meter) 4. Shift position indicator (On the combination meter) 5. Malfunction indicator lamp (MIL) ( ...