Service Notice or Precautions for Clut

WARNING: After cleaning clutch disc, wipe it with a dust collector. Never use compressed air. CAUTION: • Clutch fluid use refer to MA-13, "Fluids and Lubricants". • Never reuse drain ...

Special Service Tools

...

Other materials:

P0112, P0113 IAT sensor
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition swit ...

Oil seal
Valve oil seal VALVE OIL SEAL : Removal and Installation REMOVAL 1. Remove camshafts. Refer to EM-191, "Exploded View". 2. Remove valve lifters. Refer to EM-191, "Exploded View". 3. Rotate crankshaft, and set piston whose valve oil seal is to be removed to TDC. This will p ...

P1865 gear ratio signal
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With ...