B2321, B2322 oil level sensor

Description The oil level sensor detects the level of engine oil, and then transmits the oil level signal to the combination meter. DTC Logic DTC DETECTION LOGIC NOTE: When the following con ...

Fuel level sensor signal circuit

Component Function Check 2WD MODELS 1.CHECK COMBINATION METER OUTPUT SIGNAL Select the “Data Monitor” for the “METER/M&A” and compare the “FUEL METER” monitor value with the fuel gauge readi ...

Other materials:

U1000 can comm circuit
Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-vehicle multiplex communication system with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto vehicles, and ea ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...

C1115 wheel sensor
DTC Logic DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.CHECK DTC DETECTION With CONSULT-III. 1. Stat the en ...