Nissan Juke Service and Repair Manual : Power Control System IPDM E/R (with I-key)
- Precaution
- System description
- ECU diagnosis information
- Wiring diagram
- DTC/circuit diagnosis
- U1000 can comm circuit
- B2098 ignition relay on stuck
- B2099 ignition relay off stuck
- Power supply and ground circuit
- Removal and installation
LAN System can system (type 11)
DTC/CIRCUIT DIAGNOSIS Main line between IPDM-E and DLC circuit Diagnosis Procedure 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. ...Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, ...Other materials:
P0611 ECM protection
Description
This DTC is detected when the ECM protective function is activated due to an
extreme temperature increase
in ECM, resulting from severe conditions such as heavy load driving.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
This DTC ...
System
System Diagram
System Description
Refer to Owner’s Manual for navigation and audio system operating
instructions.
Audio function and display are built into NAVI control unit.
This navigation has the following functions.
• All of European Map including UK postcode on SD-card.
• Full s ...
Water pump
Exploded View
1. Gasket
2. Water pump
3. Water pump pulley
: Always replace after every
disassembly.
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
Removal and Installation
REMOVAL
1. Drain engine coolant from radiator. Refer to CO-37, "Draining".
CAUTION:
• Perform this step w ...