Normal operating condition

Description FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED) If the engine speed is above 1,800 rpm under no load (for example, the selector lever position is neutral and engine speed is over ...

Idle speed

Description This describes how to check the idle speed. For the actual procedure, follow the instructions in “BASIC INSPECTION”. Special Repair Requirement 1.CHECK IDLE SPEED With CONSULT-III ...

Other materials:

Engine cooling system
The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine coo ...

Front wiper arm
Exploded View RHD models 1. Front wiper arm cap 2. Front wiper arm RH 3. Front wiper drive assembly 4. Front wiper motor 5. Front wiper blade LH 6. Front wiper arm LH 7. Front wiper blade RH : Pawl : N·m (kg-m, in-lb) : N·m (kg-m, ft-lb) LHD models 1. Front wiper arm cap 2. Fr ...

Door lock status indicator
Component Function Check 1.CHECK FUNCTION 1. Select “DOOR LOCK” of “BCM” using CONSULT-III. 2. Select “DOOR LOCK IND” in “ACTIVE TEST” mode. 3. Check that the function operates normally according to the following conditions. Is the inspection result normal? YES >> Door lock status in ...