Special Service Tool

...

Engine oil

Inspection OIL LEVEL AND MUDDINESS • Before starting the engine, check the oil level placing vehicle horizontally. If the engine is already started, stop it and allow 10 minutes before checkin ...

Other materials:

Horn function
Component Function Check 1.CHECK FUNCTION 1 1. Disconnect vehicle security horn relay. 2. Perform “VEHICLE SECURITY HORN” in “ACTIVE TEST” mode of “THEFT ALM” of “BCM” using CONSULT- III. 3. Check the horn operation. Is the operation normal? YES >> GO TO 2. NO >> Go to SEC- ...

Rear window defogger on signal
With auto A/C WITH AUTO A/C : Description Turns the indicator lamp in the rear window defogger switch ON when operating the rear window defogger WITH AUTO A/C : Component Function Check 1.CHECK REAR WINDOW DEFOGGER ON SIGNAL Check that the indicator lamp of rear window defogger switch is illu ...

P1805 brake switch
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON. 2. Fully depress the brake pedal for at least 5 seconds. 3. Erase the DTC. 4. Check 1st trip DTC. Is 1st trip DTC detected? YES >> Proceed to EC-374, "Dia ...