Nissan Juke Service and Repair Manual : P2226 baro sensor
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1.REPLACE ECM
Perform EC-879, "Work Procedure".
>> INSPECTION END
P2120 APP sensor
DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK GROUND CONNECTIONS 1. Turn ignition switch OFF. 2. Check ground connection E38. Refer to Ground inspection in GI-44, "Circuit In ...P2263 TC system
DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK VACUUM HOSES AND VACUUM GALLERY 1. Turn ignition switch OFF. 2. Check vacuum hoses and vacuum gallery for clogging, cracks or improper ...Other materials:
System
CVT control system : System Diagram
CVT control system : System Description
INPUT/OUTPUT SIGNAL TABLE
*: With Nissan Dynamic Control System
SYSTEM DESCRIPTION
• CVT detects the vehicle driving status from switches, sensors and signals,
and controls the vehicle so that
the optimum shift p ...
Camera image signal circuit
Description
• The NAVI control unit supplies power to the rear view camera when receiving
a reverse signal.
• The rear view camera transmits camera images to the NAVI control unit when
power is supplied from the
NAVI control unit.
Diagnosis Procedure
1.CHECK CONTINUITY CAMERA POWER SUPPLY C ...
P0643 sensor power supply
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always turn
ignition switch OFF and wait at
least 10 seconds before conducting the next test.
TESTING CONDITION:
Before performing the following proced ...