Nissan Juke Service and Repair Manual : P062B ECM

DTC Logic

DTC DETECTION LOGIC

Diagnosis Procedure


Diagnosis Procedure

1.INSPECTION START

1. Turn ignition switch ON.

2. Erase DTC.

3. Turn ignition switch OFF and wait for 20 seconds.

4. Turn ignition switch ON and perform the self-diagnosis.

Is the DTC P062B displayed again? YES >> GO TO 2.

NO >> INSPECTION END

2.REPLACE ECM

1. Replace ECM.

2. Go to EC-879, "Work Procedure".

>> INSPECTION END

    P061A ECM
    DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.INSPECTION START 1. Turn ignition switch ON. 2. Erase DTC. 3. Turn ignition switch OFF and wait for 20 seconds. 4. Turn ignition switch ON ...

    P0638 electric throttle control actuator function
    DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0638 is displayed with DTC P0120 or P2100, first perform trouble diagnosis for DTC P0120 or P2100. Refer to EC-909, "DTC Logic" (P0120), ...

    Other materials:

    Diagnosis system (IPDM E/R)
    Diagnosis Description AUTO ACTIVE TEST Description In auto active test mode, the IPDM E/R sends a drive signal to the following systems to check their operation. • Oil pressure warning lamp (only for K9K engine models) • Rear window defogger • Front wiper motor • Parking lamp • License p ...

    B26EF steering lock relay
    DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B26EF is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to BCS-83, "DTC Logic". • If DTC B26EF is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to BCS-84, "D ...

    Radiator
    Exploded View 1. Reservoir tank cap 2. Reservoir tank 3. Clamp 4. Reservoir tank hose 5. Mounting rubber (upper) 6. Reservoir tank hose 7. Radiator 8. Mounting rubber (lower) 9. Drain plug 10. O-ring 11. Cooling fan assembly 12. Radiator hose (upper) 13. Radiator hose (lower) ...