Nissan Juke Service and Repair Manual : P0575 ASCD steering switch
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1.CHECK ASCD STEERING SWITCH CIRCUIT
1. Check ASCD steering switch circuit.
ASCD steering switch>>Refer to EC-1011, "Component Function Check" and EC-1011, "Diagnosis Procedure".
ASCD main switch>>Refer to EC-1009, "Component Function Check" and EC-1009, "Diagnosis Procedure".
P0574 VSS
DTC Logic DTC DETECTION LOGIC ...P0606 ECM
DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.INSPECTION START 1. Turn ignition switch ON. 2. Erase DTC. 3. Turn ignition switch OFF and wait for 20 seconds. 4. Turn ignition switch ON ...Other materials:
Rear regulator
Exploded View
1. Rear door panel
2. Sealing screen
3. Lower sash (front)
4. Rear door regulator assembly
5. Power window motor
6. Rear door glass
7. Lower sash (rear)
8. Rear door glass run
Removal and Installation
REMOVAL
1. Remove rear door glass. Refer to GW-21, "Removal an ...
Ambient sensor
Removal and Installation
REMOVAL
1. Remove bumper fascia assembly. Refer to EXT-13, "Removal and
Installation".
2. Disengage fixing pawl, and then remove ambient sensor (1)
from air guide RH.
: Pawl
3. Disconnect ambient sensor connector (2), and then remove
ambient sensor.
INS ...
System
Engine control system : System Diagram
Engine control system : System Description
ECM performs various controls such as fuel injection control and ignition
timing control.
MULTIPORT FUEL INJECTION SYSTEM
Multiport fuel injection system : System Diagram
Multiport fuel injection system : ...