Nissan Juke Owners Manual : Owner’s Manual Supplement 2014 Nissan Juke

The information contained within this supplement replaces the Sun Visors information contained in Section 3 “Pre-driving checks and adjustments”, the Manual Air Conditioner (if so equipped) and Automatic Air Conditioner (with Integrated Control System) information in Section 4 “Heater, air conditioner, audio and phone systems” of the 2014 Nissan Juke Owner’s Manual.

Read carefully and keep in vehicle.

Printing: October 2013 (01) Publication No. SP4E-0F15U0

SUN VISORS

TILT OPERATION


TILT OPERATION

Push the lock lever down 1 and adjust the steering wheel up or down 2 to the desired position.

Pull the lock lever up 3 securely to lock the steering wheel in place.

CAUTION


CAUTION

• Do not store the main sun visor before storing the extension sun visor.

• Do not pull the extension sun visor forcedly downward.

1. To block out glare from the front, swing down the main sun visor 1 .

2. To block glare from the side, remove the main sun visor from the center mount and swing it to the side 2 .

3. Draw out the extension sun visor 3 from the main sun visor to block from further glare.

1. Air intake lever (Outside air circulation


1. Air intake lever (Outside air circulation ) /Air recirculation
2. Air flow control dial)
2. Air flow control 3. Fan speed control dialdial
3. Fan speed control dial 4. A/C (Air Conditioner) button 5. Temperature control dial 6. Rear window defroster MANUAL AIR CONDITIONER (if so equipped) button


MANUAL AIR CONDITIONER (if so equipped)

To turn off the heater and air conditioner, turn the fan speed control Controls dial to the OFF (0) position.


Controls

Outside air circulation:

Move the air intake lever to the position. The air flow is drawn from outside the vehicle.
position. The air flow is drawn from outside the vehicle.

Air recirculation:

Move the air intake lever to the position. The air flow is circulated inside the vehicle.
position. The air flow is circulated inside the vehicle.

Air flow control:

Turn the air flow control dial to change the air flow mode.

side ventilators. — Air flows from the center and
side ventilators.

ventilators and foot outlets. — Air flows from the center and side
ventilators and foot outlets.

— Air flows from the defroster and — Air flows mainly from the foot outlets.


foot outlets. — Air flows from the defroster and
foot outlets.

outlets. — Air flows mainly from the defroster
outlets.

• When the position is selected, the air conditioner or
will automatically turn on. position is selected, the air conditioner
will automatically turn on.

This will dehumidify the air and help to defog the windows.

Fan speed control:

Turn the fan speed control clockwise to increase the fan speed. dial
clockwise to increase the fan speed.

Turn the fan speed control counterclockwise to decrease the fan speed. dial
counterclockwise to decrease the fan speed.

A/C (Air Conditioner) operation:

Push the A/C button to turn on or off the air conditioner. When the air conditioner is on, the A/C indicator light on the button illuminates.

Temperature control:

Turn the temperature control dial to set the desired temperature. Turn the dial between the middle and the right position to select the hot temperature. Turn the dial between the middle and the left position to select the cool temperature.

Heater operation

Heating

:
This mode is used to direct heated air to the foot outlets.

1. Move the air intake lever to the 2. Turn the air flow control dial to the position.


2. Turn the air flow control dial to the 3. Turn the fan speed control  dial position.


3. Turn the fan speed control to the desired position. dial
to the desired position.

4. Turn the temperature control dial to the desired position between the middle and the hot (right) position.

Ventilation:

This mode directs outside air to the side and center ventilators.

1. Move the air intake lever to the 2. Turn the air flow control dial to the position.


2. Turn the air flow control dial to the 3. Turn the fan speed control  dial position.


3. Turn the fan speed control to the desired position. dial
to the desired position.

Defrosting or defogging:

This mode directs the air to the defroster outlets to defrost/defog the windows.

1. Move the air intake lever to the 2. Turn the air flow control dial to the position.


2. Turn the air flow control dial to the 3. Turn the fan speed control dial to position.


3. Turn the fan speed control the desired position.dial to
the desired position.

4. Turn the temperature control dial to the desired position between the middle and the hot (right) position.

• To remove frost from the outside surface of the windshield quickly, turn the temperature control dial to the maximum hot position and the fan speed control • When the  position is selected, thedial to the maximum position.


• When the air conditioner will automatically turn on. This will dehumidify the air and help position is selected, the
air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows.

Bi-level heating:

This mode directs cool air from the side and center vents and warm air from the foot outlets.

When the temperature control dial is turned to the maximum hot or cool position, the air between the ventilators and the foot outlets is the same temperature.

1. Move the air intake lever to the 2. Turn the air flow control dial to the position.


2. Turn the air flow control dial to the 3. Turn the fan speed control  dial position.


3. Turn the fan speed control to the desired position. dial
to the desired position.

4. Turn the temperature control dial to the desired position.

Heating and defogging:

This mode heats the interior and defogs the windows.

1. Move the air intake lever to the 2. Turn the air flow control dial to the position.


2. Turn the air flow control dial to the 3. Turn the fan speed control  dial position.


3. Turn the fan speed control to the desired position. dial
to the desired position.

4. Turn the temperature control dial to the desired position.

When the position is selected, the air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows.

Air conditioner operation

The air conditioner system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the air conditioner system due to the lack of lubrication.

Cooling:

This mode is used to cool and dehumidify the air.

1. Move the air intake lever to the 2. Turn the air flow control dial to theposition.


2. Turn the air flow control dial to the 3. Turn the fan speed control  dial position.


3. Turn the fan speed control to the desired position. dial
to the desired position.

4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the cool (left) position.

• For quick cooling when the outside temperature is high, move the air intake lever to the the air intake lever to the  position position. Be sure to move
the air intake lever to the for normal cooling. position
for normal cooling.

• A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.

Dehumidified heating:

This mode is used to heat and dehumidify the air.

1. Move the air intake lever to the 2. Turn the air flow control  dial to position.


2. Turn the air flow control the  position. dial to
the 3. Turn the fan speed control dial to the desired position. position.


3. Turn the fan speed control dial to the desired position.

4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the hot (right) position.

Dehumidified defogging:

This mode is used to defog the windows and dehumidify the air.

1. Move the air intake lever to the 2. Turn the air flow control dial to the position.


2. Turn the air flow control dial to the 3. Turn the fan speed control dial to position.


3. Turn the fan speed control the desired position.dial to
the desired position.

4. Turn the temperature control dial to the desired position.

When the air conditioner will automatically turn on. This will dehumidify the air and help position is selected, the
air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows.

1. AUTO button/Temperature control dial


1. AUTO button/Temperature control dial 2. OFF button
3. A/C button
4. CLIMATE button
5. Display screen
6. Air flow control buttons 7. Fan speed control 8. Front defroster  button dial
8. Front defroster 9. Air intake button (Outside air circulation button
9. Air intake button (Outside air circulation ) /Air recirculation
10. Rear window defroster  button )
10. Rear window defroster button

: Temperature is displayed in 8F (US) or 8C (Canada).

AUTOMATIC AIR CONDITIONER (with Integrated Control System)

Automatic operation (AUTO)

The AUTO mode may be used year-round as the system automatically controls constant temperature, air flow distribution and fan speed.

To turn off the heater and air conditioner, push the CLIMATE button to change to the Climate Control Mode, then push the OFF button.

Cooling and dehumidified heating:

1. Push the AUTO button. (The AUTO indicator will be displayed.) 2. Turn the temperature control dial to set the preferred temperature. The temperature range is between 608F (188C) and 908F (328C).

A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.

Heating (A/C off):

1. Push the CLIMATE button to change to the Climate Control Mode.

2. Push the AUTO button. (The AUTO indicator will be displayed.)

    Foreword
    Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepa ...

    Other materials:

    Differential side oil seal
    Exploded View 1. Transaxle assembly 2. Differential side oil seal (left side) 3. Differential side oil seal (right side) : Always replace after every disassembly. : Genuine NISSAN CVT Fluid NS-2 Removal and Installation REMOVAL NOTE: Cap or plug openings to prevent fluid from spilling ...

    Headlamp (LO) circuit
    Component Function Check 1.CHECK HEADLAMP (LO) OPERATION CONSULT-III ACTIVE TEST 1. Select “EXTERNAL LAMPS” of IPDM E/R active test item. 2. With operating the test items, check that the headlamp (LO) is turned ON. Lo : Headlamp (LO) ON Off : Headlamp (LO) OFF Is the inspection result normal? ...

    Diagnosis system (BCM)
    Common item COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the following functions for each system. NOTE: It can perform the diagnosis modes except the ...