Nissan Juke Service and Repair Manual : Operation
Switch Name and Function
System
METER SYSTEM METER SYSTEM : System Diagram *: K9K engine models METER SYSTEM : System Description COMBINATION METER • The combination meter receives necessary signals from each unit, switch, ...Diagnosis system (combination meter)
On Board Diagnosis Function ON BOARD DIAGNOSIS ITEM The combination meter allows the following diagnosis items with the on-board diagnosis function. METHOD OF STARTING 1. Turn ignition switch ...Other materials:
P0643 sensor power supply
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always perform
the following procedure
before conducting the next test.
1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition swit ...
Door lock status indicator does not illuminate
Diagnosis Procedure
1.CHECK DOOR LOCK STATUS INDICATOR
Check door lock status indicator.
Refer to DLK-395, "Component Function Check".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace the malfunctioning parts.
2.REPLACE BCM
1. Replace BCM ...
Push-button ignition switch illumination circuit
Description
Provides the power supply and the ground to control the push-button ignition
switch illumination.
Component Function Check
1.CHECK PUSH-BUTTON IGNITION SWITCH ILLUMINATION OPERATION
CONSULT-III ACTIVE TEST
1. Turn the ignition switch ON.
2. Select “ENGINE SW ILLUMI” of BCM (INTEL ...