Nissan Juke Owners Manual : Operating range for engine start function

The Intelligent Key can only be used for starting the engine when the Intelligent


The Intelligent Key can only be used for starting the engine when the Intelligent Key is within the specified operating range1 .

When the Intelligent Key battery is almost discharged or strong radio waves are present near the operating location, the Intelligent Key system’s operating range becomes narrower and may not function properly.

If the Intelligent Key is within the operating range, it is possible for anyone, even someone who does not carry the Intelligent Key, to push the ignition switch to start the engine.

• The cargo room area is not included in the operating range but the Intelligent Key may function.

• If the Intelligent Key is placed on the instrument panel, inside the glove box or door pocket, the Intelligent Key may not function.

• If the Intelligent Key is placed near the door or window outside the vehicle, the Intelligent Key may function.

    Push-button ignition switch (models with Intelligent Key system)
    WARNING Do not operate the push-button ignition switch while driving the vehicle except in an emergency. (The engine will stop when the ignition switch is pushed 3 consecutive times or the igniti ...

    Push-button ignition switch operation
    When the ignition switch is pushed without depressing the brake pedal (Continuously Variable Transmission models) or the clutch pedal (manual transmission models), the ignition switch position w ...

    Other materials:

    Malfunction indicator
    Component Function Check 1.CHECK MI FUNCTION 1. Turn ignition switch ON. 2. Make sure that MI lights up. Is the inspection result normal? YES >> INSPECTION END NO >> Go to EC-1019, "Diagnosis Procedure". Diagnosis Procedure 1.CHECK CAN COMMUNICATION LINE Refer to LAN ...

    P1831 VDC operation signal
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.DTC REPRODUCTION PROCEDURE With CONSULT-III 1. Start the engine and drive at 30 km/h (19 MPH) or more. 2. Perform self-diagnosis for “ALL MODE AWD/4WD”. Is DTC “P1831” detected? YES >> Proceed to diagnosis procedure. Refer ...

    B1080, B1096 driver air bag module
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAG RESULT With CONSULT-III 1. Turn ignition switch ON. 2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III. Without CONSULT-III 1. Turn ignition switch ON. 2. Check the air bag warning lamp statu ...