Nissan Juke Service and Repair Manual : Oil seal
- Valve oil seal
- Front oil seal
- Rear oil seal
- Cylinder head
- Oil pan (upper)
- Cylinder block
- How to select piston and bearing
Camshaft
Exploded View 1. Camshaft position sensor (PHASE) 2. O-ring 3. Camshaft bracket 4. Camshaft (EXH) 5. Camshaft sprocket (EXH) 6. Camshaft sprocket (INT) 7. Camshaft (INT) 8. Valve lifter ...Valve oil seal
VALVE OIL SEAL : Removal and Installation REMOVAL 1. Remove camshafts. Refer to EM-78, "Exploded View". 2. Remove valve lifters. Refer to EM-78, "Exploded View". 3. Rotate cran ...Other materials:
Rear regulator
Exploded View
1. Rear door panel
2. Sealing screen
3. Lower sash (front)
4. Rear door regulator assembly
5. Power window motor
6. Rear door glass
7. Lower sash (rear)
8. Rear door glass run
Removal and Installation
REMOVAL
1. Remove rear door glass. Refer to GW-21, "Removal an ...
Units
• The UNITS given in this manual are primarily expressed as the SI UNIT
(International System of Unit), and
alternatively expressed in the metric system and in the yard/pound system.
Also with regard to tightening torque of bolts and nuts, there are descriptions
both about range and about th ...
P0045 TC boost control solenoid valve
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1.CHECK TURBOCHARGER BOOST CONTROL SOLENOID VALVE POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect turbocharger boost control solenoid valve harness connector.
3. Turn ignition switch ON.
4. Check the voltage between turbochar ...