Nissan Juke Owners Manual : Locking with inside lock knob
To lock the door without the key, move the inside lock knob to the lock position1 then close the door.
To unlock, move the inside lock knob to the unlock position2 .
When locking the door without a key, be sure not to leave the key inside the vehicle.
Locking with key
The power door lock system allows you to lock or unlock all doors simultaneously. • Turning the driver’s door key cylinder to the front of the vehicle1 will lock all doors and the lift gate ...Locking with power door lock switch
Driver’s armrest Operating the power door lock switch will lock or unlock all the doors. The switch is located on the driver’s door armrest. To lock the doors, push the power door lock switch to ...Other materials:
Front wiper auto stop signal circuit
Component Function Check
1.CHECK FRONT WIPER (AUTO STOP) SIGNAL
CONSULT-III DATA MONITOR
1. Select “WIP AUTO STOP” of IPDM E/R data monitor item.
2. Operate the front wiper.
3. With the front wiper operation, check the monitor status.
Is the status of item normal?
YES >> Auto stop sig ...
U0122 Vehicle dynamics control
module
Description
CAN (Controller Area Network) is a serial communication line for real time
application. It is an on-vehicle multiplex
communication line with high data communication speed and excellent error
detection ability. Many electronic
control units are equipped onto a vehicle, and each c ...
ACC warning does not operate
Diagnosis Procedure
1.CHECK COMBINATION METER BUZZER
Check combination meter buzzer.
Refer to WCS-40, "Component Function Check".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace the malfunctioning parts.
2.REPLACE BCM
1. Replace BCM. Ref ...