Nissan Juke Service and Repair Manual : Line pressure test

Work Procedure

INSPECTION

1. Check the engine oil level. Replenish if necessary. LU-25, "Inspection".

2. Check for leak of the CVT fluid. Refer to TM-480, "Inspection".

3. Drive for about 10 minutes to warm up the vehicle so that the CVT fluid temperature is 50 to 80°C (122 to 176°F).

4. Be sure to apply the parking brake and block the tires.

5. Start the engine.

6. Select “Data Monitor” in “TRANSMISSION”.

7. Select “LINE PRESSURE”.

8. Measure the line pressure at both idle and the stall speed.

CAUTION:
Keep brake pedal pressed all the way down during measurement.

Line pressure : Refer to TM-513, "Line Pressure".

NARROWING-DOWN MALFUNCTIONING PARTS

CVT position


    Stall test
    Work Procedure INSPECTION 1. Check the engine oil level. Replenish if necessary. Refer to LU-25, "Inspection". 2. Check for leak of the CVT fluid. Refer to TM-480, "Inspection" ...

    CVT position
    Inspection and Adjustment INSPECTION 1. Turn ON the ignition switch with the selector lever at the P position. 2. Press the selector button with the brake pedal depressed, and confirm that the le ...

    Other materials:

    Condenser
    Exploded View 1. Condenser 2. Refrigerant pressure sensor 3. O-ring 4. Grommet 5. Braket 6. O-ring 7. Liquid tank braket 8. Liquid tank : Do not reuse : N·m (kg-m, in-lb) : N·m (kg-m, ft-lb) Condenser : Removal and Installation CAUTION: Perform lubricant return operation before ...

    Main line between DLC and A-bag circuit
    Diagnosis Procedure 1.CHECK HARNESS CONTINUITY (OPEN CIRCUIT) 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Disconnect the BCM harness connector. 4. Check the continuity between the data link connector and the BCM harness connector. - With In ...

    System
    POWER WINDOW SYSTEM POWER WINDOW SYSTEM : System Diagram POWER WINDOW SYSTEM : System Description • Power window system is activated by power window switch when ignition switch turns ON. • Power window main switch opens/closes all door glass. • Front and rear power window switch opens/close ...