Nissan Juke Owners Manual : Lift gate
WARNING
• Always be sure the lift gate has been closed securely to prevent it from opening while driving.
• Do not drive with the lift gate open.
This could allow dangerous exhaust gases to be drawn into the vehicle.
See “Exhaust gas (carbon monoxide)” of this manual.
• Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls.
Unattended children could become involved in serious accidents.
• Make sure that all passengers have their hands, etc. inside the vehicle before closing the lift gate.
To open the lift gate, unlock it and push the lift gate opener switch A . Pull up the lift gate to open.
The lift gate can be unlocked by:
• pushing the UNLOCK button on the keyfob or the Intelligent Key (if so equipped) twice.
• pushing the lift gate request switch with the Intelligent Key carried with you (if so equipped).
• pushing the power door lock switch to the unlock position.
• inserting the key into the driver’s door key cylinder and turning it to the rear of the vehicle twice.
Hood
WARNING • Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident. • If you see steam or smoke coming from th ...Front side and rear unique parts (NISMO models)
The NISMO models have the following unique parts on the front, side and rear of the vehicle. • Front bumper • Daytime running light (, , ) • Side sill extensions • Rear spoiler ...Other materials:
Operating tips
• When the shift lever is shifted to the R (Reverse) position, the monitor screen
automatically changes to the RearView Monitor mode. However, the radio can be heard.
• When the view is switched, the display images on the screen may be displayed with
some delay.
• When the temperature is extre ...
Harness layout
LHD
LHD : How To Read Harness Layout
CONNECTOR SYMBOL
Main symbols of connector (in Harness Layout) are indicated in the below.
LHD : Engine Room Harness
ENGINE COMPARTMENT
PASSENGER COMPARTMENT
LHD : Engine Control Harness
HR ENGINE
MR ENGINE
K9K ENGINE
LHD : Main Harness
...
Unit removal and installation
Transaxle assembly
Exploded View
1. CVT fluid level gauge
2. CVT fluid charging pipe
3. O-ring
4. Transaxle assembly
5. Air breather hose
A. For tightening torque, refer to TM-301, "Removal and Installation".
Removal and Intallation
REMOVAL
WARNING:
Never remove the reservo ...