Nissan Juke Service and Repair Manual : License plate lamp

Exploded View

1. License plate lamp housing assembly


1. License plate lamp housing assembly 2. Blub
3. License plate lamp blub socket

Removal and Installation: Pawl


Removal and Installation

CAUTION:
Disconnect battery negative terminal or remove the fuse.

REMOVAL

1. While pressing the license plate lamp to direction right side, pull it to direction outside and then remove it.

2. Disconnect license plate lamp connector.

INSTALLATION


INSTALLATION

Install in the reverse order of removal.

Replacement

CAUTION:
• Disconnect the battery negative terminal or the fuse.

• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.

• Never touch bulb by hand while it is lit or right after being turned off.

• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

LICENSE PLATE LAMP BULB

1. Remove license plate lamp.

2. Rotate the bulb socket counterclockwise and unlock it.

3. Remove the bulb from the socket.

    High-mounted stop lamp
    Exploded View 1. High-mounted stop lamp 2. Seal packing : N·m (kg-m, in-lb) Removal and Installation CAUTION: Disconnect battery negative terminal or remove the fuse. REMOVAL 1. Remove blin ...

    Rear fog lamp
    Exploded View REMOVAL 1. Rear fog lamp DISASSEMBLY 1. Rear fog lamp housing 2. Rear fog lamp bulb 3. Rear fog lamp bulb sock Removal and Installation CAUTION: Disconnect battery negativ ...

    Other materials:

    Diagnosis systeM (BCM) (without intelligent key system)
    Common item COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the following functions for each system. NOTE: It can perform the diagnosis modes except the ...

    Basic inspection
    DIAGNOSIS AND REPAIR WORK FLOW Work Flow DESCRIPTION OF TROUBLE DIAGNOSIS FLOWCHART DETAILS OF TROUBLE DIAGNOSIS FLOWCHART 1.OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction oc ...

    P0122, P0123 TP SENSOR
    DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0122 or P0123 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to EC-686, "DTC Logic". DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, alw ...