Nissan Juke Service and Repair Manual : Lap pre-tensioner
Exploded View
Refer to SB-4, "Exploded View".
Removal and Installation
For removal and installation procedures, refer to SB-5, "SEAT BELT RETRACTOR : Removal and Installation".
Seat belt pre-tensioner
Exploded View Refer to SB-4, "Exploded View". Removal and Installation For removal and installation procedures, refer to SB-5, "SEAT BELT RETRACTOR : Removal and Installation" ...Disposal of air bag module
Driver air bag module : Deployment CHECKING DEPLOYMENT TOOL Connecting to Battery CAUTION: The battery must show voltage of 9.6 V or more. Remove the battery from the vehicle and place it on dry ...Other materials:
Door lock status indicator does not illuminate
Diagnosis Procedure
1.CHECK DOOR LOCK STATUS INDICATOR
Check door lock status indicator.
Refer to DLK-395, "Component Function Check".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace the malfunctioning parts.
2.REPLACE BCM
1. Replace BCM ...
P0841 transmission fluid pressure SEN/SW A
Description
Using the engine load (throttle position), the primary pulley revolution
speed, and the secondary pulley revolution
speed as input signal, TCM changes the operating pressure of the primary pulley
and the secondary pulley
and changes the groove width of the pulley to control the ge ...
B2267 engine speed
Description
The engine speed signal is transmitted from ECM to the combination meter via
CAN communication.
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS OF ECM
Perform “Self Diagnostic Result” of “ENGINE”, and repair or replace
malfunctioning parts.
>& ...