Nissan Juke Service and Repair Manual : IPDM E/R (intelligent power distribution module engine room)

Fuse, Connector and Terminal Arrangement

Harness layout


    Fuse, fusible link and relay box
    Fuse and Fusible Link Arrangement HR ENGINE AND MR ENGINE WITH CVT DIESEL ENGINE AND MR ENGINE WITH M/T ...

    Harness layout
    LHD LHD : How To Read Harness Layout CONNECTOR SYMBOL Main symbols of connector (in Harness Layout) are indicated in the below. LHD : Engine Room Harness ENGINE COMPARTMENT PASSENGER COMPART ...

    Other materials:

    Basic inspection
    DIAGNOSIS AND REPAIR WORKFLOW Work Flow DETAILED FLOW 1.INTERVIEW FROM THE CUSTOMER Clarify customer complaints before inspection. First of all, perform an interview utilizing STC-17, "Diagnostic Work Sheet" and reproduce symptoms as well as fully understand it. Ask customer about ...

    Engine cooling system
    The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine coo ...

    Liquid Gasket
    REMOVAL OF LIQUID GASKET SEALING • After removing mounting nuts and bolts, separate the mating surface using the seal cutter [SST: KV10111100] (A) and remove old liquid gasket sealing. CAUTION: Be careful not to damage the mating surfaces. • Tap the seal cutter [SST: KV10111100] to insert it ...