Nissan Juke Service and Repair Manual : Interior room lamp control system
Wiring Diagram
For connector terminal arrangements, harness layouts, and alphabets in a
(option abbreviation: if not
described in wiring diagram), refer to GI-12, "Connector Information/Explanation
of Option Abbreviation".
Wiring diagram
...Illumination
Wiring Diagram For connector terminal arrangements, harness layouts, and alphabets in a (option abbreviation: if not described in wiring diagram), refer to GI-12, "Connector Information/Explan ...Other materials:
ASCD brake switch
Component Function Check
1.CHECK ASCD BRAKE SWITCH FUNCTION
With CONSULT-III
1. Turn ignition switch ON.
2. Select “ENGINE” using CONSULT-III.
3. Select “BRAKE SW1” in “DATA MONITOR” mode.
4. Check “BRAKE SW1” indication under the following conditions.
Without CONSULT-III
1. Turn ignition ...
B terminal circuit
Description
The “B” terminal is constantly supplied with battery power.
Diagnosis Procedure
CAUTION:
Perform diagnosis under the condition that engine cannot start by the following
procedure.
1. Remove fuel pump fuse.
2. Crank or start the engine (where possible) until the fuel pressure is ...
Air breather hose
Removal and Installation
REMOVAL
1. Remove clip from bracket.
2. Remove air breather hose from transaxle assembly.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
• Check that air breather hose is not collapsed or blocked due to folding or
bending ...