Nissan Juke Owners Manual : Intelligent Key operation



You can lock or unlock the doors without taking the key out from your pocket


You can lock or unlock the doors without taking the key out from your pocket or bag.

When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver’s or front passenger’s) A or lift gate request switchB within the range of operation.

When you lock or unlock the doors, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” .

Locking doors

1. Place the ignition switch in the OFF position and carry the Intelligent Key with you.1
2. Close all the doors.2 3. Push the door handle request switch (driver’s or front passenger’s) A or the lift gate request switch B while carrying the Intelligent Key with you.3 4. All the doors and the lift gate will lock.

5. The hazard indicator flashes twice and the outside chime sounds twice.

1: Doors will lock with the request switch while the ignition switch is in the ACC or ON position.

2: Doors will not lock with the request switch while any door is open.

3: Doors will not lock with the request switch when the Intelligent Key is left inside the vehicle.

However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key.

Unlocking doors

1. Push the door handle request switchA or the lift gate request switch B while carrying the Intelligent Key with you.

2. The hazard indicator flashes once and outside chime sounds once. The corresponding door or the lift gate will unlock.

3. Push the request switch again within 1 minute.

4. The hazard indicator flashes once and outside chime sounds once again. All the doors and the lift gate will unlock.

All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the request switch while the doors are locked.

• Opening any door.

• Pushing the ignition switch.

During this 1-minute time period, if the UNLOCK all doors will be locked automatically after another 1 minute. button on the Intelligent Key is pushed,
all doors will be locked automatically after another 1 minute.

Opening lift gate

1. Carry the Intelligent Key.

2. Push the lift gate opener switch C .

3. The lift gate will unlock.

    Door locks/unlocks precaution
    • Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have diffic ...

    Battery saver system
    When all the following conditions are met for a period of time, the battery saver system will cut off the power supply to prevent battery discharge. • The ignition switch is in the ACC position, an ...

    Other materials:

    Headlight switch
    Lighting 1 Turn the switch to the position: The front parking, side marker, tail, license plate, instrument lights and daytime running lights (for NISMO models) will come on. 2 Turn the switch to the position: Headlights will come on and all the other lights remain on. However, the daytime ...

    PTC branch line circuit
    Diagnosis Procedure 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the PTC heater control unit for damage, bend and loose connection (unit side and connector side). Is the inspection re ...

    Information display (speed limiter)
    Component Function Check 1.CHECK INFORMATION DISPLAY (SPEED LIMITER) FUNCTION 1. Start engine. 2. Press speed limiter MAIN switch. 3. Drive the vehicle at more than 30 km/h (20 MPH). CAUTION: Always drive vehicle at a safe speed. 4. Press SET/− switch. 5. Perform a test drive on a fl ...