Nissan Juke Service and Repair Manual : Intelligent key low battery warning does not operate

Nissan Juke Service and Repair Manual / Door & Lock Type 1 / Symptom diagnosis / Intelligent key low battery warning does not operate

Diagnosis Procedure

1.CHECK DTC WITH BCM AND COMBINATION METER

Check that DTC is not detected with BCM and combination meter.

Is the inspection result normal? YES >> GO TO 2.

NO-1 >> Refer to BCS-67, "DTC Index". (BCM) NO-2 >> Refer to MWI-36, "DTC Index". (Combination meter)

2.CHECK “LO- BATT OF KEY FOB WARN” SETTING IN “WORK SUPPORT”

1. Select “INTELLIGENT KEY” of “BCM”.

2. Select “LO- BATT OF KEY FOB WARN” in “WORK SUPPORT” mode.

3. Check “LO- BATT OF KEY FOB WARN” in “WORK SUPPORT”.

Refer to DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (With Super Lock)".

Is the inspection result normal? YES >> GO TO 3.

NO >> Set “LO- BATT OF KEY FOB WARN” in “WORK SUPPORT”.

3.CHECK KEY WARNING LAMP

Check key warning lamp.

Refer to DLK-94, "Component Function Check".

Is the inspection result normal? YES >> GO TO 4.

NO >> Repair or replace the malfunctioning parts.

4.CHECK INTELLIGENT KEY

Check Intelligent key.

Refer to DLK-91, "Component Function Check".

Is the inspection result normal? YES >> GO TO 5.

NO >> Repair or replace the malfunctioning parts.

5.CHECK INSIDE KEY ANTENNA

Check inside key antenna.

• Instrument center: Refer to DLK-55, "DTC Logic".

• Console: Refer to DLK-57, "DTC Logic".

• Luggage room: Refer to DLK-59, "DTC Logic".

Is the inspection result normal? YES >> GO TO 6.

NO >> Repair or replace the malfunctioning parts.

6.REPLACE BCM

1. Replace BCM. Refer to BCS-93, "Removal and Installation".

2. Confirm the operation after replacement.

Is the result normal? YES >> INSPECTION END

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

    Take away warning does not operate
    Diagnosis Procedure 1.CHECK DTC WITH BCM AND COMBINATION METER Check that DTC is not detected with BCM and combination meter. Is the inspection result normal? YES >> GO TO 2. NO-1 >& ...

    Door lock operation warning does not operate
    Diagnosis Procedure 1.CHECK DOOR LOCK FUNCTION Check door lock function. Does door lock/unlock using door request switch? YES >> GO TO 2. NO >> Refer to DLK-85, "Component Fu ...

    Other materials:

    Getting started
    The following procedures will help you get started using the Bluetooth® Hands-Free Phone System with NISSAN Voice Recognition. For additional command options, refer to “List of voice commands” . Choosing a language You can interact with the Bluetooth® Hands- Free Phone System using English, ...

    Front wheel hub and knuckle
    Inspection COMPONENT PART Check that the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal. WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE) Check the following items, and replace the part if necessary. • Move wheel hub assembly in ...

    Control cable
    Exploded View 1. Control cable 2. Lock plate 3. Transaxle assembly 4. Bracket A 5. Bracket B 6. CVT shift selector assembly A: Manual lever B: Grommet : N·m (kg-m, ft-lb) : N·m (kg-m, in-lb) Removal and Installation INSTALLATION CAUTION: Always apply the parking brake before per ...