Nissan Juke Service and Repair Manual : Intelligent key

Component Function Check

1.CHECK FUNCTION

1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

2. Select “RKE OPE COUN1” in “DATA MONITOR” mode.

3. Check that the function operates normally according to the following conditions.

Is the inspection result normal?


Is the inspection result normal? YES >> Intelligent Key is OK.

NO >> Refer to DLK-91, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK INTELLIGENT KEY BATTERY

Check by connecting a resistance (approximately 300 Ω) so that the current value becomes about 10 mA. Refer to DLK-193, "Removal and Installation".

Standard : Approx. 2.5 - 3.0 V

Is the measurement value within the specification? YES >> Replace Intelligent Key.

NO >> Replace Intelligent Key battery.

Intelligent key warning buzzer


    Hazard function
    Component Function Check 1.CHECK FUNCTION 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 2. Select “FLASHER” in “ACTIVE TEST” mode. 3. Check that the function operates normally according ...

    Intelligent key warning buzzer
    Component Function Check 1.CHECK FUNCTION 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 2. Select “OUTSIDE BUZZER” in “ACTIVE TEST” mode. 3. Check that the function operates normally acc ...

    Other materials:

    Back door does not opened
    Diagnosis Procedure 1.CHECK BACK DOOR OPENER SWITCH Check back door opener switch. Refer to DLK-69, "Component Function Check". Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace the malfunctioning parts. 2.CHECK BACK DOOR OPENER ACTUATOR C ...

    The braking distance is long
    Description Brake stopping distance is long when ABS function is operated. Diagnosis Procedure CAUTION: Brake stopping distance on slippery road like rough road, gravel road or snowy road may become longer when ABS is operated than when ABS is not operated. 1.CHECK BRAKING FORCE Check bra ...

    Exhaust manifold
    Exploded View 1. Stud bolt 2. Exhaust manifold cover 3. Exhaust manifold 4. Gasket Engine front : N·m (kg-m, ft-lb) : N·m (kg-m, in-lb) : Always replace after every disassembly. Removal and Installation REMOVAL 1. Drain engine coolant. Refer to CO-11, "Draining". 2. Remo ...