Removal and Disassembly

• When instructed to use SST, use specified tools. Always be careful to work safely, avoid forceful or uninstructed operations. • Exercise maximum care to avoid damage to mating or sliding surface ...

Assembly and Installation

• Use torque wrench to tighten bolts or nuts to specification. • When tightening nuts and bolts, as a basic rule, equally tighten in several different steps starting with the ones in center, then ...

Other materials:

Engine knock
Description CHART 16: ENGINE KNOCK Diagnosis Procedure 1.CHECK ENGINE OIL Check the grade of engine oil. Refer to LU-33, "Inspection". Is the inspection result normal? YES >> GO TO 2. NO >> Replace engine oil. Refer to LU-34, "Refilling". 2.CHECK ENGINE ...

Air conditioner filter
Exploded View LHD models 1. A/C unit assembly 2. Air conditioner filter 3. Filter cover Removal and Installation (LHD models) REMOVAL 1. Remove glove box assembly. Refer to IP-13, "Removal and Installation". 2. Remove filter cover (1), and then remove air conditioner filter (2) ...

Brake fluid
Inspection BRAKE FLUID LEVEL • Check that the fluid level in the reservoir tank is within the specified range (MAX – MIN lines). • Visually check for any brake fluid leakage around the reservoir tank. • Check the brake system for any leakage if the fluid level is extremely low (lower than MIN ...