Nissan Juke Service and Repair Manual : Inspection
OIL LEAKAGE
Check transfer surrounding area (oil seal, drain plug, filler plug, and transfer case etc.) for oil leakage.
OIL LEVEL
1. Remove filler plug (1) and gasket. Then check that oil is filled up from mounting hole for the filler plug.
Vehicle front
CAUTION:
Never start engine while checking oil level
.
2. Before installing filler plug, set a new gasket. Install filler plug on transfer and tighten to the specified torque. Refer to DLN-113, "Exploded View".
CAUTION:
Never reuse gasket.
Periodic maintenance
TRANSFER OIL ...Draining
1. Run the vehicle to warm up the transfer unit sufficiently. 2. Stop the engine and remove the drain plug (1) and gascket to drain the transfer oil. 3. Before installing drain plug, set a new gask ...Other materials:
How to Follow Test Groups in Trouble Diagnosis
1. Test group number and test group title
• Test group number and test group title are shown in the upper portion of each
test group.
2. Work and diagnosis procedure
• Start to diagnose a problem using procedures indicated in enclosed test
groups.
3. Questions and results
• Questions ...
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT
PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
types of collision. Information necessary to service the system safely is
include ...
Wheels
Wash the wheels when washing the vehicle to maintain their appearance.
• Clean the inner side of the wheels when the wheel is changed or the underside
of the vehicle is washed.
• Inspect wheel rims regularly for dents or corrosion. Such damage may cause loss
of pressure or poor seal at the tir ...