Nissan Juke Owners Manual : Increasing fuel economy

• Keep your engine tuned up.

• Follow the recommended scheduled maintenance.

• Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy.

• Keep the wheels in correct alignment.

Improper alignment increases tire wear and lowers fuel economy.

• Use the recommended viscosity engine oil.

(See “Engine oil and oil filter recommendation” .)

    Fuel Efficient Driving Tips
    Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. 1. Use smooth accelerator and brake pedal application. •  Avoid rapid starts ...

    All-Wheel Drive (AWD) (if so equipped)
    WARNING •  For AWD equipped vehicles, do not attempt to raise two wheels off the ground and shift the transmission to any drive or reverse position with the engine running. Doing so may resu ...

    Other materials:

    P1829 accelerator pedal position sensor
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With ...

    B209F cranking request circuit
    DTC Logic DTC DETECTION LOGIC NOTE: If DTC B209F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to PCS- 30, "DTC Logic". DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Perform DTC CONFIRMATION PROCEDURE for DTC P1650. Re ...

    Key switch
    Component Function Check 1.CHECK FUNCTION 1. Select “DOOR LOCK” of “BCM” using CONSULT-III. 2. Select “KEY ON SW” in “DATA MONITOR” mode. 3. Check that the function operates normally according to the following conditions. Is the inspection result normal? YES >> Key switch is OK. N ...