Nissan Juke Service and Repair Manual : Ignition timing
Inspection
1.CHECK IGNITION TIMING
1. Attach timing light to loop wire as shown.
1. Loop wire
A. Timing light
B. Timing indicator
2. Check ignition timing.
>> INSPECTION END
Periodic maintenance
IDLE SPEED Inspection 1.CHECK IDLE SPEED With CONSULT-III Check idle speed in “DATA MONITOR” mode with CONSULT-III. With GST Check idle speed with Service $01 of GST. Without CONSULT-III C ...Evaporative emission system
Inspection 1. Visually inspect EVAP vapor lines for improper attachment and for cracks, damage, loose connections, chafing and deterioration. 2. Check EVAP canister as follows: a. Block port (A) ...Other materials:
Fuel level sensor unit, fuel filter
and fuel pump assembly
2WD : Exploded View
1. Fuel tank
2. Lock ring
3.
Fuel level sensor unit, fuel filter and
fuel pump assembly
4. Rock ring
Vehicle front
: N?·m (kg-m, ft-lb)
: Always replace after every
disassembly.
2WD : Removal and Installation
WARNING:
Read ???General Precautions??? when workin ...
Side oil seal
Exploded View
1. Rear final drive assembly
2. Side oil seal (right)
3. Electric controlled coupling (right)
4. Reamer bolt
5. Side oil seal (left)
6. Electric controlled coupling (left)
A. Oil seal lip B. Gear carrier mouting face
: Vehicle front
: N·m (kg-m, ft-lb)
: Always replace ...
Driver air bag module
Exploded View
1. Steering column upper cover
2. Steering column assembly
3. Steering column lower cover
4. Side lid LH
5. TORX bolt
6. Driver air bag module
7. TORX bolt
8. Side lid RH
9. Steering wheel
10. Spiral cable
11. Steering angle sensor
12. Combination switch
13. Stee ...