Nissan Juke Owners Manual : Ignition switch (models without Intelligent Key system)
WARNING
Never remove or turn the key to the LOCK position while driving. This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury.
Driving safety precautions
Your NISSAN is designed for both normal and off-road use. However, avoid driving
in deep water or mud as your NISSAN is mainly designed for leisure use, unlike a
conventional off-road vehicle.
Re ...
Continuously Variable Transmission (CVT)
The ignition lock is designed so that the ignition switch cannot be turned to
the LOCK position until the shift lever is moved to the P (Park) position.
• When turning the ignition switch to the ...
Other materials:
P0014 EVT control
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P0014 is displayed with DTC P0078, first perform trouble diagnosis for
DTC P0078. Refer to EC-
585, "DTC Logic".
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always perform
...
Cooling fan
Component Function Check
1.CHECK COOLING FAN FUNCTION
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “FAN DUTY CONTROL” in “ACTIVE TEST” mode of “ENGINE” using
CONSULT-III.
3. Check that cooling fan speed varies according to the percentage.
Without CONSULT-III
1. Activate IPDM E/ ...
Positive crankcase ventilation
Inspection
1.CHECK PCV VALVE
With engine running at idle, remove PCV valve from rocker cover. A
properly working valve makes a hissing noise as air passes through
it. A strong vacuum should be felt immediately when a finger is
placed over valve inlet.
Is the inspection result normal?
YES &g ...
