Nissan Juke Service and Repair Manual : How to use this section

Caution

• This section describes information peculiar to a vehicle and inspection procedures.

• For trouble diagnosis procedure, refer to LAN-17, "Trouble Diagnosis Procedure".

Abbreviation List

Unit name abbreviations in CONSULT-III CAN diagnosis and in this section are as per the following list.

Precaution


    Other materials:

    Door mirror (open/close motor)
    Component Function Check 1.CHECK DOOR MIRROR RETRACT FUNCTION 1. Turn ignition switch ON. 2. Operate open/close switch. Check that door mirror operates normally. Is the inspection result normal? YES >> INSPECTION END NO >> Refer to MIR-25, "Diagnosis Procedure". Diagno ...

    Meter buzzer circuit
    Component Function Check 1.CHECK OPERATION OF METER BUZZER 1. Select “BUZZER” of “BCM” on CONSULT-III. 2. Perform “LIGHT WARN ALM” of “Active Test”. Does meter buzzer beep? YES >> INSPECTION END NO >> GO TO 2. 2.CHECK COMBINATION METER INPUT SIGNAL Select the “Data Monitor” f ...

    LAN System can system (type 7)
    DTC/CIRCUIT DIAGNOSIS Main line between IPDM-E and DLC circuit Diagnosis Procedure 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the following terminals and connectors for damage, bend and loose connection (connector s ...