Nissan Juke Service and Repair Manual : General Precautions

WARNING:
When replacing fuel line parts, be sure to observe the following.

• Put a “CAUTION: FLAMMABLE” sign in the workshop.

• Be sure to work in a well ventilated area and furnish workshop with a CO2 fire extinguisher.

• Never smoke while servicing fuel system. Keep open flames and sparks away from the work area.

CAUTION:
• Use diesel fuel required by the regulations for cetane number. Refer to GI-35, "Fuel".

• Before removing fuel line parts, perform the following procedures: - Put drained fuel in an explosion-proof container and put the lid on securely. Keep the container in safe area.

- Disconnect the battery cable from the negative terminal.

• Always replace O-ring and clamps with new ones.

• Never kink or twist tubes when they are being installed.

• Never tighten hose clamps excessively to avoid damaging hoses.

• After installing tubes, check that there is no fuel leakage at connections in the following steps.

- Start engine and rev it up and check for fuel leakage at connections.

• Use only a genuine NISSAN fuel filler cap as a replacement. If an incorrect fuel filler cap is used, the “MI” may come on.

    Other materials:

    B257B, B257C ambient sensor
    DTC Logic DTC DETECTION LOGIC NOTE: • If DTC is displayed along with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to HAC- 51, "DTC Logic". • If DTC is displayed along with DTC U1010, first perform the trouble diagnosis for DTC U1010. HAC-52, "DTC Logic ...

    Service Notice or Precautions for Clut
    WARNING: After cleaning clutch disc, wipe it with a dust collector. Never use compressed air. CAUTION: • Clutch fluid use refer to MA-13, "Fluids and Lubricants". • Never reuse drained clutch fluid. • Keep painted surface on the body or other parts free of clutch fluid. If it sp ...

    Wheel sensor
    Front wheel sensor : Exploded View 1. Front LH wheel sensor 2. Front LH wheel sensor harness connector : Vehicle front : N·m (kg-m, in-lb) NOTE: Front RH wheel sensor is symmetrically opposite of LH. Front wheel sensor : Removal and Installation REMOVAL 1. Remove tires. 2. Remove the fe ...