Nissan Juke Service and Repair Manual : Front fender

Exploded View

1. Front fender assembly


1. Front fender assembly 2. Front fender stiffener

Removal and Installation: Vehicle front


Removal and Installation

REMOVAL

1. Remove front fillet molding. Refer to EXT-26, "FRONT FILLET MOLDING : Removal and Installation".

2. Remove front bumper fascia assembly. Refer to EXT-13, "Removal and Installation".

3. Remove sill cover. Refer to EXT-23, "Removal and Installation".

4. Remove fender protector. Refer to EXT-22, "Removal and Installation".

5. Remove front fender cover. Refer to EXT-20, "Exploded View".

6. Remove front combination lamp. Refer to EXL-91, "Removal and Installation".

7. Remove side turn signal lamp. Refer to EXL-98, "Removal and Installation".

8. Remove mounting bolts of front fender assembly.

9. Remove front fender stiffener (2) from the vehicle body while carefully pulling upper portion of front fender (1) toward vehicle outside.

: Vehicle front


10. Remove front fender assembly.


10. Remove front fender assembly.

CAUTION:
An viscous urethane foam is installed on the back surface of front fender. When removing the front fender, be careful to not deform the front fender while performing the procedure and removing the viscous urethane foam a little at a time.

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
• After installation, apply the touch-up paint (the body color) onto the head of front fender mounting bolts.

• After installation, adjust the following part.

- Hood assembly: Refer to DLK-142, "HOOD ASSEMBLY : Adjustment".

- Front door: Refer to DLK-156, "DOOR ASSEMBLY : Adjustment".

    Radiator core support
    HR16DE HR16DE : Exploded View 1. Radiator core support upper 2. Air guide RH (MT models) 3. Radiator core support lower 4. Air guide LH 5. Air guide (upper) 6. Air guide LH (CVT models) 7. ...

    Front door
    Exploded View 1. Front door panel 2. Grommet 3. Door hinge (upper) 4. Door hinge (lower) 5. Door check link 6. Bumper rubber 7. Door pad 8. Door striker 9. TORX bolt 10. Grommet : D ...

    Other materials:

    U1000 can comm circuit
    Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each co ...

    Refrigeration system symptoms
    Trouble Diagnosis For Unusual Pressure Diagnose using a manifold gauge whenever system’s high and/or low side pressure(s) is/are unusual. The marker above the gauge scale in the following tables indicates the standard (usual) pressure range. Refer to above table (Ambient air temperature-to-op ...

    Before starting the engine
    • Make sure the area around the vehicle is clear. • Check fluid levels such as engine oil, coolant, brake fluid, and window washer fluid as frequently as possible, or at least whenever you refuel. • Check that all windows and lights are clean. • Visually inspect tires for their appearance and ...