Nissan Juke Service and Repair Manual : Excessive operation frequency
Description
ESP function, TCS function, ABS function, EBD function and brake limited slip differential (BLSD) function operates in excessive operation frequency.
Diagnosis Procedure
1.CHECK BRAKING FORCE
Check brake force using a brake tester.
Is the inspection result normal? YES >> GO TO 2.
NO >> Check brake system.
2.CHECK FRONT AND REAR AXLE
Check that there is no excessive looseness in front and rear axle.
• Front axle
- MR16DDT: Refer to FAX-9, "Inspection".
- HR16DE: Refer to FAX-41, "Inspection".
- K9K: Refer to FAX-66, "Inspection".
• Rear axle
- 2WD: Refer to RAX-4, "Inspection".
- 4WD: Refer to RAX-12, "Inspection".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace error-detected parts.
3.CHECK WHEEL SENSOR
Check wheel sensor.
• Check installation and damage of wheel sensor.
• Check connection of wheel sensor harness connector.
• Check terminal of wheel sensor harness connector.
Is the inspection result normal? YES >> GO TO 4.
NO >> Repair or replace wheel sensor.
• Front wheel sensor: Refer to BRC-224, "FRONT WHEEL SENSOR : Removal and Installation".
• Rear wheel sensor: Refer to BRC-227, "REAR WHEEL SENSOR : Removal and Installation".
4.CHECK SENSOR ROTOR
Check that there is no looseness, damage or foreign material on sensor rotor.
Is the inspection result normal? YES >> GO TO 5.
NO >> Repair installation or replace sensor rotor.
• Front sensor rotor: Refer to BRC-229, "FRONT SENSOR ROTOR : Removal and Installation".
• Rear sensor rotor. Refer to BRC-227, "REAR WHEEL SENSOR : Removal and Installation".
5.CHECK WARNING LAMP TURNS OFF
Check that ABS warning lamp, brake warning lamp and ESP warning lamp turn OFF approx. 1 second after key switch is turned ON and stay in OFF status during driving.
CAUTION:
Brake warning lamp turns ON when parking brake is operated (parking brake switch
is ON) or brake
fluid is less than the specified level (brake fluid level switch is ON).
Is the inspection result normal? YES >> Normal
NO >> Perform self-diagnosis for “ABS” with CONSULT-III.
Unexpected brake pedal reaction
Description A malfunction of brake pedal feel (height or others) is detected when brake pedal is depressed. Diagnosis Procedure 1.CHECK FRONT AND REAR AXLE Check that there is no excessive loose ...Other materials:
Cooling fan
Exploded View
1. Fan motor
2. Fan shroud
3. Cooling fan
A. Apply on fan motor shaft
: Apply genuine high strength
thread locking sealant or equivalent.
: N·m (kg-m, in-lb)
Removal and Installation
REMOVAL
1. Drain engine coolant from radiator. Refer to CO-37, "Draining".
...
Diagnosis system (BCM)
Common item
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the ...
Excessive operation frequency
Description
ABS function and EBD function operates in excessive operation frequency.
Diagnosis Procedure
1.CHECK BRAKING FORCE
Check brake force using a brake tester.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Check brake system.
2.CHECK FRONT AND REAR AXLE
Che ...