Nissan Juke Service and Repair Manual : ESP off indicator lamp
Component Function Check
1.CHECK ESP OFF INDICATOR LAMP FUNCTION (1)
Check that ESP OFF indicator lamp in combination meter turns ON for approx. 1 second after ignition switch is turned ON.
CAUTION:
Never start engine.
Is the inspection result normal? YES >> GO TO 2.
NO >> Proceed to diagnosis procedure. Refer to BRC-215, "Diagnosis Procedure".
2.CHECK ESP INDICATOR LAMP FUNCTION (2)
Check that ESP OFF indicator lamp in combination meter turns ON/OFF when ESP OFF switch is operated.
Is the inspection result normal? YES >> INSPECTION END
NO >> Check ESP OFF switch system. Refer to BRC-210, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIRCUIT
Perform the trouble diagnosis for ABS actuator and electric unit (control unit) power supply and ground circuit.
Refer to BRC-205, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair or replace error-detected parts.
2.CHECK ESP OFF INDICATOR LAMP SIGNAL (1)
With CONSULT-III.
1. Select “ABS”, “DATA MONITOR” and “OFF LAMP” according to this order.
2. Turn the ignition switch OFF.
3. Check that data monitor displays “On” for approx. 1 second after ignition switch is turned ON, and then changes to “Off”.
CAUTION:
Never start engine
.
Is the inspection result normal? YES >> GO TO 3.
NO >> Replace ABS actuator and electric unit (control unit). Refer to BRC-233, "Removal and Installation".
3.CHECK ESP OFF INDICATOR LAMP SIGNAL (2)
With CONSULT-III.
1. Select “ABS”, “DATA MONITOR” and “OFF LAMP” according to this order.
2. Check that data monitor displays “On” or “Off” each time when ESP OFF switch is operated.
Is the inspection result normal? YES >> Check combination meter. Refer to MWI-23, "CONSULT-III Function".
NO >> Check ESP OFF switch system. Refer to BRC-210, "Diagnosis Procedure".
ESP warning lamp
Component Function Check 1.CHECK ESP WARNING LAMP FUNCTION Check that ESP warning lamp in combination meter turns ON for approx. 1 second after ignition switch is turned ON. CAUTION: Never st ...Other materials:
Ring gear shaft
Exploded View
1. Pinion lock nut
2. Companion flange
3. Drive pion oil seal
4. Pinon rear bearing
5. Transfer case
6. Gasket
7. Filler plug
8. Collapsible spacer
9. Drive pinion adjust shim
10. Drive pinion
11. Pinion front bearing
12. Ring gear
13. Ring gear shaft
14. Ring ...
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
types of collision. Information necessary to service the system safely is
include ...
Service data and specifications (SDS)
General Specifications
MR16DDT
HR16DE, K9K
Brake Pedal
Brake Booster
2WD
4WD
Front Disc Brake
MR16DDT
HR16DE, K9K
Rear Disc Brake
...