Nissan Juke Service and Repair Manual : Engine Cooling System HR16DE

Other materials:

Diagnosis and repair work flow
Work Flow OVERALL SEQUENCE DETAILED FLOW 1.GET INFORMATION ABOUT SYMPTOM Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs). >> GO TO 2. 2.CHECK DTC 1. Check DTC of “ENGINE”, “BCM” and “IPDM E/R” ...

C1110, C1170 ABS actuator and electric unit (control unit)
DTC Logic DTC DETECTION LO DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.CHECK DTC DETECTION With CONSULT-II ...

On is not displayed when pressing rear window defogger switch but it is operated
Diagnosis Procedure 1.CHECK MULTI DISPLAY UNIT FUNCTION Check that the multi display unit is operating normally. • Auto A/C (4WD models). Refer to HAC-44, "Work Flow". • Auto A/C (2WD models). Refer to HAC-135, "Work Flow". Is the inspection result normal? YES >> ...