Nissan Juke Service and Repair Manual : Engine control system symptoms
Symptom Table
NOTE
:
Only consult this customer complaint after a complete check using the
CONSULT-III.
Not communication with the ECM
Description CHART 1: NO COMMUNICATION WITH THE ECM Diagnosis Procedure 1.INSPECTION START Ensure that CONSULT-III is not causing the malfunction by trying to establish dialogue with an ECM on a ...Other materials:
U1000 can comm circuit
Description
CAN (Controller Area Network) is a serial communication line for real time
applications. It is an on-board multiplex
communication line with high data communication speed and excellent error
detection ability. A modern
vehicle is equipped with many ECMs, and each control unit shar ...
Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE:
• Before removing and installing any control units, first turn the ignition
switch to the LOCK position, then disconnect
both battery cables.
• After finishing work, confirm that all control unit connectors are connected
properly, then re-connect both
battery cables.
• Always use CONS ...
On Board Diagnostic (OBD) System of Engine and CVT
The ECM has an on board diagnostic system. It will light up the malfunction
indicator (MI) to warn the driver of
a malfunction causing emission deterioration.
CAUTION:
• Be sure to turn the ignition switch OFF and disconnect the negative battery
cable before any repair
or inspection work. ...