Nissan Juke Service and Repair Manual : Ecu diagnosis information
Diagnosis system (multi display unit)
CONSULT-III Function APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with multi display unit. SELF DIAGNOSTIC RESULT Refer to AV-111, "DTC Index". ...Multi display unit
Reference Value VALUES ON THE DIAGNOSIS TOOL • *1:MR16DDT • *2: This is not used to determine ON/OFF of the indicator lamp. TERMINAL LAYOUT PHYSICAL VALUES DTC Inspection Priority Chart ...Other materials:
P0217 engine over temperature
DTC Logic
DTC DETECTION LOGIC
If the cooling fan or another component in the cooling system malfunctions,
engine coolant temperature will
rise.
When the engine coolant temperature reaches an abnormally high temperature
condition, a malfunction is
indicated.
Diagnosis Procedure
1.CHECK ...
P0444 EVAP canister purge volume
control solenoid valve
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CONDITIONING
If DTC Confirmation Procedure has been previously conducted, always perform
the following procedure
before conducting the next test.
1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ...
B1006, B1007, B1008, B1009, B1010 diagnosis sensor unit
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning lamp statu ...