Diagnosis system (air bag)

Description CAUTION: • Never use electrical test equipment on any circuit related to the SRS unless instructed in this Service Manual. SRS wiring harnesses can be identified by yellow and/or oran ...

Wiring diagram

SRS AIR BAG SYSTEM Wiring Diagram For connector terminal arrangements, harness layouts, and alphabets in a (option abbreviation; if not described in wiring diagram), refer to GI-12, "Connect ...

Other materials:

Back door opener switch
Component Function Check 1.CHECK FUNCTION 1. Select “TRUNK” of “BCM” using CONSULT-III. 2. Select “TR/BD OPEN SW” in “DATA MONITOR” mode. 3. Check that the function operates normally according to the following conditions. Is the inspection result normal? YES >> Back door opener switc ...

A/C auto AMP.
Reference Value CONSULT-III DATA MONITOR REFERENCE VALUES *: “DUTY” is displayed, but voltage is indicated. Or unit is not displayed but unit is (V). TERMINAL LAYOUT PHYSICAL VALUES *: With K9K Fail-safe FAIL-SAFE FUNCTION If a communication error exists between the A/C auto amp. a ...

A/C control
Exploded View 1. Intake door cable 2. Mode door cable 3. A/C control 4. Air mix door cable 5. Intake door lever knob A. To mode door link B. To intake door link C. To air mix door link Removal and Installation REMOVAL 1. Remove A/C finisher. Refer to IP-13, "Removal and Install ...