Nissan Juke Service and Repair Manual : ECU diagnosis information

ABS actuator and electric unit (control unit)

Reference Value

CONSULT-III DATA MONITOR STANDARD VALUE



*1: Confirm tire pressure is standard value.


*1: Confirm tire pressure is standard value.

*2: Refer to “valve operation” in BRC-105, "System Description" for valve operation of each valve.

*3: Refer to BRC-105, "System Description" for ON/OFF conditions of each warning lamp and indicator lamp.

*4: Models with CVT.

Fail-safe

ESP FUNCTION, TCS FUNCTION AND BRAKE LIMITED SLIP DIFFERENTIAL (BLSD) FUNCTION

ESP warning lamp in combination meter turn ON when a malfunction occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for ESP function, TCS function and brake limited slip differential (BLSD) function. The vehicle status becomes the same as models without ESP function, TCS function and brake limited slip differential (BLSD) function. However, ABS function and EBD function are operated normally.

ABS FUNCTION

ABS warning lamp and ESP warning lamp in combination meter turn ON when a malfunction occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for ESP function, TCS function, ABS function and brake limited slip differential (BLSD) function. The vehicle status becomes the same as models without ESP function, TCS function, ABS function and brake limited slip differential (BLSD) function. However, EBD function is operated normally.

NOTE

:
ABS self-diagnosis sound may be heard the same as in the normal condition, because self-diagnosis is performed when ignition switch turns ON and when vehicle initially starts.

EBD FUNCTION

ABS warning lamp, brake warning lamp and ESP warning lamp in combination meter turn ON when a malfunction occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for ESP function, TCS function, ABS function, EBD function and brake limited slip differential (BLSD) function. The vehicle status becomes the same as models without ESP function, TCS function, ABS function, EBD function and brake limited slip differential (BLSD) function.



DTC Inspection Priority Chart


DTC Inspection Priority Chart

When multiple DTCs are displayed simultaneously, check one by one depending on the following priority list.


DTC Index


DTC Index


Wiring diagram


    Diagnosis system [ABS actuator and electric unit (control unit)]
    CONSULT-III Function APPLICATION ITEMS CONSULT-III can display each diagnostic item using the diagnostic test modes as follows. *1: The following diagnosis information is erased by erasing. • ...

    Wiring diagram
    BRAKE CONTROL SYSTEM Wiring Diagram For connector terminal arrangements, harness layout, and alphabets in a (option abbreviation; if not described in wiring diagram), refer to GI-12, "Connec ...

    Other materials:

    B2555 stop lamp
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Depress the brake pedal and wait 1 second or more. 2. Check DTC in “Self Diagnostic Result” mode of “BCM” using CONSULT-III. Is DTC detected? YES >> Go to SEC-73, "Diagnosis Procedu ...

    P2A00 A/F sensor 1
    DTC Logic DTC DETECTION LOGIC To judge the malfunction, the A/F signal computed by ECM from the A/F sensor 1 signal is monitored so it will not shift to LEAN side or RICH side. DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always ...

    Electric foldable door mirror does not operate
    Diagnosis Procedure 1.CHECK DOOR MIRROR (OPEN/CLOSE MOTOR) CIRCUIT Check door mirror (open/close motor) circuit. Refer to MIR-25, "Component Function Check". Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace the malfunctioning parts. 2.CONF ...