Nissan Juke Service and Repair Manual : DTC/Circuit diagnosis
- Trouble diagnosis - specification value
- Power supply and ground circuit
- U0101 Can comm circuit
- U0122 Vehicle dynamics control module
- U1001 Can comm circuit
- P0011 IVT control
- P0014 EVT control
- P0031, P0032 A/F sensor 1 heater
- P0037, P0038 HO2S2 heater
- P0045, P0047, P0048 TC boost control solenoid valve
- P0075 IVT control solenoid valve
- P0078 EVT control solenoid valve
- P0087, P0088, P0090 FRP control system
- P0097, P0098 IAT sensor 2
- P0102, P0103 MAF sensor
- P0107, P0108 atmospheric pressure sensor
- P0112, P0113 IAT sensor
- P0117, P0118 ECT sensor
- P0122, P0123 TP sensor
- P0130 A/F sensor 1
- P0131 A/F sensor 1
- P0132 A/F sensor 1
- P0133 A/F sensor 1
- P0137 HO2S2
- P0138 HO2S2
- P0139 HO2S2
- P0171 fuel injection system function
- P0172 fuel injection system function
- P0190 FRP sensor
- P0197, P0198 EOT sensor
- P0201, P0202, P0203, P0204 fuel injector
- P0222, P0223 TP sensor
- P0234 TC system
- P0237, P0238 TC boost sensor
- P0300, P0301, P0302, P0303, P0304 misfire
- P0327, P0328 KS
- P0335 CKP sensor (POS)
- P0340 CMP sensor (PHASE)
- P0420 three way catalyst function
- P0444 EVAP canister purge volume control solenoid valve
- P0500 VSS
- P0501, P2159 vehicle speed sensor
- P0506 ISC system
- P0507 ISC system
- P0520 EOP sensor
- P0524 engine oil pressure
- P0603 ECM power supply
- P0605 ECM
- P0607 ECM
- P0611 ECM protection
- P062B ECM
- P0643 sensor power supply
- P0850 PNP switch
- P1078 EVT control position sensor
- P1197 out of gas
- P1212 TCS communication line
- P1217 engine over temperature
- P1220 fuel pump control module (FPCM)
- P1225 TP sensor
- P1226 TP sensor
- P1550 battery current sensor
- P1551, P1552 battery current sensor
- P1553 battery current sensor
- P1554 battery current sensor
- P1556, P1557 battery temperature sensor
- P1564 ASCD steering switch
- P1572 ASCD brake switch
- P1574 ASCD vehicle speed sensor
- P158A ECM
- P159A, P159C, P159D G sensor
- Except for M/T models
- P159B G sensor
- P1650 starter motor relay 2
- P1651 starter motor relay
- P1652 starter motor system COMM
- P1805 brake switch
- P2100, P2103 throttle control motor relay
- P2101 electric throttle control function
- P2118 throttle control motor
- P2119 electric throttle control actuator
- P2122, P2123 APP sensor
- P2127, P2128 APP sensor
- P2135 TP sensor
- P2138 APP sensor
- P2162 vehicle speed sensor
- Fuel injector
- Low pressure fuel pump
- High pressure fuel pump
- Ignition signal
- Electrical load signal
- Cooling fan
- Refrigerant pressure sensor
- Brake pedal position switch
- Clutch pedal position switch
- ASCD main switch
- SPEED LIMITER MAIN SWITCH
- Information display (ASCD)
- Information display (speed limiter)
- Malfunction indicator lamp
How to set srt code
Description
OUTLINE
In order to set all SRTs, the self-diagnoses as in the “SRT ITEM” table must
have been performed at least
once. Each diagnosis may require actual driving for a long period of ...
Trouble diagnosis - specification
value
Description
The specification (SP) value indicates the tolerance of the value that is
displayed in “SPEC” of “DATA MONITOR”
mode of CONSULT-III during normal operation of the Engine Control Syste ...
Other materials:
Tire equipment
SUMMER tires have a tread designed to provide superior performance on dry pavement.
However, the performance of these tires will be substantially reduced in snowy and
icy conditions.
If you operate your vehicle on snowy or icy roads, NISSAN recommends the use
of MUD & SNOW or ALL SEASON t ...
Towing your vehicle
When towing your vehicle, all State (Provincial in Canada) and local regulations
for towing must be followed. Incorrect towing equipment could damage your vehicle.
Towing instructions are available from a NISSAN dealer. Local service operators
are familiar with the applicable laws and procedur ...
Intake sensor
Exploded View
Refer to HA-97, "Exploded View (Automatic Air Conditioning)".
Removal and Installation
REMOVAL
1. Remove evaporator assembly. Refer to HA-115, "EVAPORATOR : Removal and
Installation".
2. Remove intake sensor from evaporator.
INSTALLATION
Note the followin ...
