Additional service when removing battery negative terminal

Description • The NAVI control unit is equipped with the anti-theft system. • The NAVI control unit operates after authenticating a fixed four-digit anti-theft code. • After removing the battery ...

Power supply and ground circuit

Navi control unit NAVI CONTROL UNIT : Diagnosis Procedure 1.CHECK FUSE Check for blown fuses. Is inspection result OK? YES >> GO TO 2. NO >> Be sure to eliminate cause of malfunc ...

Other materials:

Brake warning lamp
Component Function Check 1.CHECK BRAKE WARNING LAMP FUNCTION (1) Check that brake warning lamp in combination meter turns ON for approx. 1 second after ignition switch is turned ON. CAUTION: Never start engine. Is the inspection result normal? YES >> GO TO 2. NO >> Proceed ...

Rear shock absorber
Exploded View 1. Suspension arm 2. Shock absorber 3. Bound bumper 4. Bound bumper cover 5. Washer 6. Bushing 7. Distance tube 8. Piston rod lock nut 9. Cap : Vehicle front : Always replace after every disassembly. : N·m (kg-m, ft-lb) Removal and Installation REMOVAL 1. Remove ...

P181D engine torque signal
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With ...